Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeZone T / Amb Thrm
ApplianceIce Maker
Quick answer
Zone T and Amb Thrm messages report open or shorted thermistor circuits on the U-3018CLRS-40B clear ice machine.
Model compatibility: U-Line reuses display codes across control platforms, so Zone T / Amb Thrm may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Zone T Open, Zone T Short and Amb Thrm Open: left or right zone thermistor, or ambient thermistor, circuit open or shorted; contact Customer Care.
Reading the three messages
Zone T Open: the thermistor circuit for the left or right zone is open.
Zone T Short: the thermistor circuit for the left or right zone is shorted.
Amb Thrm Open: the ambient thermistor circuit is open.
They are listed for the U-3018CLRS-40B, a current 3000-series clear ice machine.
At a glance
Code
Zone T / Amb Thrm
What it means
Left or right zone thermistor, or ambient thermistor, circuit is open or shorted.
What you can check
Nothing is asked of you for these messages. Write down the exact wording shown, such as Zone T Open or Amb Thrm Open, and the model number.
When to call a technician
Any of these thermistor circuit messages calls for a service visit, since no owner step exists. Tell the technician the exact message.
What to do
The manual’s solution for each is to contact Customer Care. Nothing is asked of the owner beforehand.
Other codes in the table
For a lost display link see No Comm; for the thermistor LED signal on older machines see Slow flash. WTD Reset needs no action either.
Ice maker repair service
Reach technicians in the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 706-1091 for ice maker repair. Tell them the exact message and the model number.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.