Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeSlow flash
ApplianceIce Maker
Quick answer
Slow flash is a sensor warning on older U-Line clear ice makers; the manuals link it to the thermistor plug or a failed thermistor.
Model compatibility: U-Line reuses display codes across control platforms, so Slow flash may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Control board LED slow flash: sensor problem (thermistor plug disconnected or thermistor failed open); the unit stops operating.
What a slow flash tells you
Applies to: CLR60, plus the original CLR2060 and CLRCO2075 control boards (older series).
Signal: LED on the control board flashing slowly.
Meaning: the board found a sensor problem.
Effect: the unit stops operating.
Why it happens
Per the manuals, the flash occurs when the thermistor’s plug is disconnected from the board, and also when the thermistor itself fails open. With the power disconnected, a technician can tell which of the two it is.
At a glance
Code
Slow flash
What it means
Slow LED flash on the control board signals a sensor problem; the unit stops operating.
What you can check
Do not work on the unit while it is powered; no owner step is given. Note whether the thermistor plug looks disconnected from the board.
When to call a technician
The unit stops operating until this is fixed, so book a service visit to tell a disconnected plug from a thermistor that failed open.
Rapid or slow?
A fast flash means something different, a high-heat reading: see Rapid flash. Thermistor circuit messages on a newer 3000-series unit are collected under Zone T and Amb Thrm.
Ice maker service across our areas
Booking is open for the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 706-1091. For ice maker repair, quote the slow flash, the model number and what you noticed at the thermistor plug.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.