Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeNo Comm
ApplianceIce Maker
Quick answer
No Comm on the U-3018CLRS-40B clear ice machine, with the power-cycle step and the technician checks.
Model compatibility: U-Line reuses display codes across control platforms, so No Comm may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Unit lost communication to the display.
The short version
The U-3018CLRS-40B 3000-series clear ice machine reports No Comm when its display link drops. The manual’s fix for owners comes in two steps:
At a glance
Code
No Comm
What it means
Unit lost communication to the display.
What you can check
Unplug the unit and plug it back in, then see whether No Comm stays. Leave the cable and voltage tests to a technician.
When to call a technician
If No Comm stays after the power cycle, book a service visit; the fix may mean replacing the user interface, the main control board or the cable.
Unplug the unit and plug it back in.
If No Comm stays, contact Customer Care.
Behind the scenes
Technicians follow a longer check that starts at the cable running from the user interface to the main board. Depending on the voltage found there, the user interface, the main control board or the cable itself gets replaced. Owners should leave these tests alone.
See also
When communication is lost and the software restarts, WTD Reset may be logged, and the manual asks for no action. Also related are P1, an open pump circuit, and the Time to Clean reminder.
Ice maker repair service
We send technicians through the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 706-1091 for ice maker repair, and have the code, the model number and the result of the power cycle on hand.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.