Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeCondenser T Short
ApplianceIce Maker
Quick answer
The U-3018CLRS-40B logs Condenser T Short when the condenser thermistor circuit is shorted.
Model compatibility: U-Line reuses display codes across control platforms, so Condenser T Short may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
The log reports Condenser T Short for a shorted condenser thermistor circuit.
Condenser T Short explained
The U-3018CLRS-40B is a current 3000-series clear ice machine. A shorted condenser thermistor circuit is recorded under the name Condenser T Short.
At a glance
Code
Condenser T Short
What it means
The log reports Condenser T Short for a shorted condenser thermistor circuit.
What you can check
No owner step is given here; the checks involve the thermistor-to-harness connection and the board plug. Write down the entry name as it appears in the log.
When to call a technician
A shorted thermistor circuit needs a technician to check for moisture or corrosion and replace the thermistor if needed, so book a service visit.
Technician’s checklist
Moisture or corrosion where the thermistor meets its harness.
The harness plug on the main board.
The thermistor, replaced if the connections are valid.
Where else to look
An open version of this circuit is covered by Condenser T Open, and a shorted bin thermistor is Bin T Short.
Ice maker repair for the Miami, New York, Houston, Los Angeles and San Diego metro areas
Service is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas through (844) 706-1091. Give the entry name and the model. Learn more on the ice maker repair page.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.