Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeP1
ApplianceIce Maker
Quick answer
P1 pump circuit open, explained by series: current clear, nugget and outdoor machines, and the older CLR2160 / CLRCO2175 with a P60 pump.
Model compatibility: U-Line reuses display codes across control platforms, so P1 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Pump circuit open, with a drain pump or drain line problem on models that use one.
One code, three readings
Machine
Reading
UHCP115, UACP115, URCC115 clear ice machines
Pump circuit open, relevant only when a drain pump is fitted
UHNB315 nugget, UOCP115 outdoor clear ice machine
Pump circuit open, plus an app service notice about a restricted drain line or a failed drain pump
CLR2160 and CLRCO2175 with a P60 pump (older series)
Pump circuit open, meaning a drain problem was detected
What owners can do
Owner advice exists only for the older series: see a plumber about the drain, and where no P60 pump is installed, confirm that the jumper wire is present. On the newer machines a restricted drain line or a drain pump fault is a job for service.
At a glance
Code
P1
What it means
Pump circuit open, with a drain pump or drain line problem on models that use one.
What you can check
On an older unit with a pump, see a plumber about the drain, and if no pump is installed, confirm the jumper wire is present. Newer machines have no owner step.
When to call a technician
On the newer machines a restricted drain line or a drain pump fault is a job for service, so book a visit and say whether a pump is installed.
Codes people confuse with P1
On the nugget machine a drain fault is reported as Er16 and a supply fault as Er15. A lost display link shows as No Comm.
Pump and ice maker repair service
Service reaches the Miami, New York, Houston, Los Angeles and San Diego metro areas. Dial (844) 706-1091 for ice maker repair and read out the code, the model number and whether a pump is installed.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.