Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeE6
ApplianceRefrigerator
Quick answer
E6 means thermistor 2 shorted on current U-Line units, or a long too-cold reading on older Echelon and Origins units.
Model compatibility: U-Line reuses display codes across control platforms, so E6 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
E6 means thermistor 2 shorted on current U-Line models, and thermistor 1 at 10°F or more below set point for over 12 hours on legacy models.
Meaning by series
Current series: thermistor 2 shorted.
Echelon and Origins: thermistor 1 has read 10°F or more under the set point for more than 12 hours (not on the CLR2160).
Where it shows
Thermistor faults on current units do not pop up on screen. The manual says everything is saved in memory and that only a door error is shown, with a beep. The error log is where E6 is read.
At a glance
Code
E6
What it means
Thermistor 2 is shorted on current models, or thermistor 1 has read 10°F or more under set point for over 12 hours on legacy models.
What you can check
E6 comes with no owner step. Do not adjust the thermistor differential setting, and read the code in the error log, since it does not pop up on screen.
When to call a technician
If the code returns, schedule a service visit and mention any steps you have already tried.
Owner steps
The manuals contain none for E6. Do not adjust the thermistor differential setting, which the manual says should not be adjusted. For a code that returns, schedule service.
Related
E5 and E7 are the other shorted-thermistor codes. E10 is the top drawer alarm and E9 is the lower door alarm.
Book U-Line refrigerator repair in your area
Our service-center line covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 706-1091. See refrigerator repair for the service details. Keep the model number and the code in front of you, and mention any steps already tried.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Refrigerator Repair
Undercounter refrigerator not cooling or holding temperature? We diagnose U-Line refrigeration faults and restore stable cooling.