Skip to content
Response time varies by location and service availability.
Error Code

U-Line Refrigerator E5 Code: Thermistor 1 Shorted

Error code E5
Appliance Refrigerator
Quick answer

E5 flags thermistor 1 shorted on current U-Line units, and an over-12-hours warm reading on legacy ones.

Model compatibility: U-Line reuses display codes across control platforms, so E5 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E5 means thermistor 1 shorted on current U-Line models, and thermistor 1 at 10°F or more above set point for over 12 hours on legacy models.

What the code stands for

  • Current models (refrigerators, wine cabinets, beverage centers, plus clear ice, nugget and outdoor clear ice machines): thermistor 1 shorted.
  • Echelon and Origins, older series: thermistor 1 has been 10°F or more above set point for longer than 12 hours. Not on the CLR2160.

Steps from the manuals

  1. Confirm your series from the model number.
  2. On a legacy unit that has just been connected to power, give it 24 hours, then check whether the code has cleared.
  3. On a current unit, find the entry by scrolling the error log. A door fault is the only one that shows on the display by itself.

When E5 persists after that, it needs a technician.

At a glance

Code E5
What it means Thermistor 1 is shorted on current models, or has run 10°F or more above set point for over 12 hours on legacy models.
What you can check Confirm your series from the model number. On a legacy unit just connected to power, wait 24 hours and see if the code cleared. On a current unit, scroll the error log to find it.
When to call a technician If E5 persists after that, it needs a technician, so arrange a service visit and mention what you already tried.

Compare with

E6 (thermistor 2 shorted), E3 (thermistor 3 open), E11 (memory error) and ER (legacy thermistor failure).

Book U-Line refrigerator repair in your area

Our service-center line covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 706-1091. See refrigerator repair for the service details. Tell the dispatcher the code shown, the model number from the unit and what you have already done.

Source: U-Line UHRE515-IS01A User Guide & Service Manual; U-Line UHRE524-SS81A User Guide & Service Manual, View Error Log; U-Line 2008 Service Manual, Echelon and Origins Series, Error Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit