Skip to content
Response time varies by location and service availability.
Error Code

U-Line Ice Maker Slow Flash Code: Sensor Problem

Error code Slow flash
Appliance Ice Maker
Quick answer

Slow flash is a sensor warning on older U-Line clear ice makers; the manuals link it to the thermistor plug or a failed thermistor.

Model compatibility: U-Line reuses display codes across control platforms, so Slow flash may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Control board LED slow flash: sensor problem (thermistor plug disconnected or thermistor failed open); the unit stops operating.

What a slow flash tells you

  • Applies to: CLR60, plus the original CLR2060 and CLRCO2075 control boards (older series).
  • Signal: LED on the control board flashing slowly.
  • Meaning: the board found a sensor problem.
  • Effect: the unit stops operating.

Why it happens

Per the manuals, the flash occurs when the thermistor’s plug is disconnected from the board, and also when the thermistor itself fails open. With the power disconnected, a technician can tell which of the two it is.

At a glance

Code Slow flash
What it means Slow LED flash on the control board signals a sensor problem; the unit stops operating.
What you can check Do not work on the unit while it is powered; no owner step is given. Note whether the thermistor plug looks disconnected from the board.
When to call a technician The unit stops operating until this is fixed, so book a service visit to tell a disconnected plug from a thermistor that failed open.

Rapid or slow?

A fast flash means something different, a high-heat reading: see Rapid flash. Thermistor circuit messages on a newer 3000-series unit are collected under Zone T and Amb Thrm.

Ice maker service across our areas

Booking is open for the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 706-1091. For ice maker repair, quote the slow flash, the model number and what you noticed at the thermistor plug.

Source: U-Line CLR60 Clear Ice Maker Service and Parts Manual (Thermistor, Check Procedure w/LED Light on Control Board); U-Line Service and Parts Manual P/N 30-10010 (Rev. 2/05), control board LED, New CLR2060 control board design

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit