Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeCL
ApplianceIce Maker
Quick answer
CL is a cleaning-related display on U-Line ice machines. The nugget models and the CLR2160 treat it differently.
Model compatibility: U-Line reuses display codes across control platforms, so CL may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
CL is a cleaning-related display and not a fault on U-Line ice machines.
CL on the CLR2160 (legacy)
CL shows that the unit is in cleaning mode.
Cleaning takes around 45 minutes, followed by 15 minutes of idle time.
The machine switches back on automatically. No fault is involved.
CL on the UHNB115 and UHNP115 nugget machines
Expect CL roughly every six months. Ice production carries on.
Start the nugget cleaning cycle with a 10 second hold of the clean button.
Reset CL by holding the up, down and light buttons together for 10 seconds.
Do not mix it up
The CLEAN message is a similar cleaning reminder, while Condenser T Open is a genuine thermistor entry.
At a glance
Code
CL
What it means
CL is a cleaning-related display and not a fault on U-Line ice machines.
What you can check
On a nugget machine, start the cleaning cycle with a 10 second hold of the clean button, and reset CL by holding the up, down and light buttons together for 10 seconds.
When to call a technician
If CL does not go away, schedule a service visit and say whether you ran the cleaning cycle.
Ice maker repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas
Call (844) 706-1091 from the Miami, New York, Houston, Los Angeles and San Diego metro areas when CL does not go away. Mention the model and whether you ran the cleaning cycle. See ice maker repair for more.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Ice Maker Repair
Ice maker not producing ice, making too little, or leaking? We diagnose U-Line ice makers thoroughly.