Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeTemp Hi 6H+
ApplianceWine Storage
Quick answer
A zone in a U-Line dual-zone wine cabinet has been 10°F over set point for 6 hours or more. The manual says to check the door seal.
Model compatibility: U-Line reuses display codes across control platforms, so Temp Hi 6H+ may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Left or right zone temperature 10°F (5°C) above set point for over 6 hours.
Temp Hi 6H+ in short
Meaning: a zone sits 10°F (5°C) over its set point and has done so for over 6 hours.
At a glance
Code
Temp Hi 6H+
What it means
Left or right zone temperature 10°F (5°C) above set point for over 6 hours.
What you can check
Make sure the door is shut and the seal is making contact.
When to call a technician
If the message does not clear, book a service visit and mention whether you already checked the door.
Variants: Temp Hi 6H+, L Temp Hi 6H+, R Temp Hi 6H+, (L) (R) Temp Hi 6H+.
Zone key: L is the top zone or drawer, R the bottom one (DWR/ZWC models).
Which units
The U-3036BVWCS-00B (3036 dual-zone) and the DWR/ZWC series. The code belongs to the current generation.
Owner steps from the manual
Make sure the door is shut and the seal is making contact.
If the message does not clear, get in touch with Customer Care.
Codes people confuse with it
Temp Hi 12H+ is the same warm fault after a longer stretch.
Temp Lo 6H+ points the other way, below set point.
We handle U-Line wine storage service in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 706-1091 and mention the code, the model number and whether you already checked the door.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Beverage Center Repair
Beverage center not chilling drinks reliably? We diagnose U-Line beverage centers for temperature, noise, and control faults.