Reviewed by U-Line Repair Editorial Team · Last reviewed August 11, 2026
Written by
U-Line Repair Editorial Team Editorial TeamPublished August 11, 2026Updated October 28, 2026Technically reviewed August 11, 2026
Error codeE4
ApplianceRefrigerator
Quick answer
E4 is a thermistor 4 listing that does not apply to current models, and a log-only entry on older Echelon and Origins units.
Model compatibility: U-Line reuses display codes across control platforms, so E4 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
E4 is thermistor 4 open, noted as not applicable to the listed current models, and a log-only compressor runtime entry on legacy models.
Two series, two readings
Current UHRE, UHWC, UHBD, UHRI and UHRF models: E4 reads thermistor 4 open, and the manuals add that it does not apply to the model.
Echelon and Origins (legacy): the compressor ran for the full period between two defrost cycles. It is not shown on the display, only in the error log.
How to see it
Open the error log from the control. The log scrolls through faults in the order they happened. All of them are stored, yet the display itself only reports a door error, together with an audible signal.
At a glance
Code
E4
What it means
Thermistor 4 is open and does not apply on current models; on legacy models the compressor ran the full period between defrost cycles.
What you can check
Open the error log from the control to see the entry. No owner action is described for this code.
When to call a technician
If the code keeps appearing or the unit is not holding its temperature, arrange service.
Owner action
None is listed for E4. If the code keeps appearing or the unit is not holding its temperature, arrange service.
See also
E3 (thermistor 3 open), E5 (thermistor 1 shorted) and E10 (top drawer open for more than 20 minutes) are the usual codes people mix up with it.
Book U-Line refrigerator repair in your area
Our service-center line covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 706-1091. See refrigerator repair for the service details. Keep the model number and the code in front of you, and mention any steps already tried.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
Fix it right
Recommended repair service
U-Line Refrigerator Repair
Undercounter refrigerator not cooling or holding temperature? We diagnose U-Line refrigeration faults and restore stable cooling.