Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller RELAY 5 BROKEN Code: Board Relay Failure

Error code RELAY 5 BROKEN
Appliance Blast Chiller
Quick answer

RELAY 5 BROKEN is a board alarm on touch screen U-Line blast chillers. Relay 5 has a detected failure and the manual says call service.

Model compatibility: U-Line reuses display codes across control platforms, so RELAY 5 BROKEN may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The board found a failure on relay 5; call service.

Meaning

The controller on your U-Line blast chiller has decided relay 5 is broken. In the manual this reads: the electronic board detected a failure on relay 5.

At a glance

Code RELAY 5 BROKEN
What it means The board found a failure on relay 5; call service.
What you can check Relay faults are board-level and not an owner job. Note whether the screen mentions more than one relay.
When to call a technician Call for a service visit. If more than one relay is mentioned, tell the technician about every one of them.

Response

Call service. Relay faults are board-level and not an owner job.

Models and generation

Touch screen controller; current generation; UCBF432 / UCBF532 / UCBF632 / UCBF559 / UCBF659.

Looking at the log

The ALARM tab keeps what appeared during the cycle. Tell the technician if more than one relay is mentioned, for example RELAY 7 BROKEN.

Service in the Miami, New York, Houston, Los Angeles and San Diego areas

Customers in the Miami, New York, Houston, Los Angeles and San Diego metro areas can call (844) 706-1091. Say which relay the chiller named and give the model.

Source: U-Line UCBF559-SS12A Blast Chiller User Guide and Service Manual, Pub. 30379 Rev. P; U-Line Blast Chiller User Guide, Touch Screen Manual (Rev 08/04/2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit