Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller RELAY 7 BROKEN Code: Board Relay Failure

Error code RELAY 7 BROKEN
Appliance Blast Chiller
Quick answer

RELAY 7 BROKEN is a board alarm on touch screen U-Line blast chillers. Relay 7 has a detected failure and the manual says call service.

Model compatibility: U-Line reuses display codes across control platforms, so RELAY 7 BROKEN may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The board found a failure on relay 7; call service.

Relay 7 failure alarm

The wording RELAY 7 BROKEN is U-Line’s alarm for a failure found by the electronic board on relay 7. Service is the recommended call.

At a glance

Code RELAY 7 BROKEN
What it means The board found a failure on relay 7; call service.
What you can check Look in the ALARM tab and record the relay number. Another relay may also be flagged, so write down each one you see.
When to call a technician Call for service. Report every relay alarm that appeared so the technician knows the full picture.

Which units

UCBF659 and UCBF559, plus UCBF632, UCBF532 and UCBF432. All use the touch screen controller.

Steps for the owner

  1. Look in the ALARM tab.
  2. Record the relay number.
  3. Call.

Linked alarms

Another relay may be flagged as well: RELAY 1 BROKEN, RELAY 3 BROKEN.

Blast chiller service for Miami, New York, Houston, Los Angeles and San Diego callers

Metro areas served: Miami, New York, Houston, Los Angeles and San Diego. Number: (844) 706-1091. Keep the model number nearby.

Source: U-Line UCBF559-SS12A Blast Chiller User Guide and Service Manual, Pub. 30379 Rev. P; U-Line Blast Chiller User Guide, Touch Screen Manual (Rev 08/04/2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit