Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller RELAY 3 BROKEN Code: Board Relay Failure

Error code RELAY 3 BROKEN
Appliance Blast Chiller
Quick answer

RELAY 3 BROKEN is a board alarm on touch screen U-Line blast chillers. Relay 3 has a detected failure and the manual says call service.

Model compatibility: U-Line reuses display codes across control platforms, so RELAY 3 BROKEN may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The board found a failure on relay 3; call service.

Code: RELAY 3 BROKEN

Board reports relay 3 failure. The owner’s manual says to call service.

At a glance

Code RELAY 3 BROKEN
What it means The board found a failure on relay 3; call service.
What you can check Open the ALARM tab and read the message, and confirm the number after RELAY. Keep out of the electrical compartment.
When to call a technician Relay failures call for service, not a home repair. Book a visit and have the model number on hand when you phone.

Series

This is a current-generation alarm on the touch screen controller of UCBF532, UCBF432, UCBF632, then UCBF659 and UCBF559.

Before calling

  1. Open the ALARM tab and read the message.
  2. Check the number after the word RELAY.
  3. Find the model number on the chiller.
  4. Avoid opening the electrical compartment.

Same family of alarms

Blast chiller repair, Miami, New York, Houston, Los Angeles and San Diego

Service is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 706-1091 and describe the alarm.

Source: U-Line UCBF559-SS12A Blast Chiller User Guide and Service Manual, Pub. 30379 Rev. P; U-Line Blast Chiller User Guide, Touch Screen Manual (Rev 08/04/2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit