Skip to content
Response time varies by location and service availability.
Error Code

U-Line Refrigerator E4 Code: Log Entry

Error code E4
Appliance Refrigerator
Quick answer

E4 is a thermistor 4 listing that does not apply to current models, and a log-only entry on older Echelon and Origins units.

Model compatibility: U-Line reuses display codes across control platforms, so E4 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E4 is thermistor 4 open, noted as not applicable to the listed current models, and a log-only compressor runtime entry on legacy models.

Two series, two readings

  1. Current UHRE, UHWC, UHBD, UHRI and UHRF models: E4 reads thermistor 4 open, and the manuals add that it does not apply to the model.
  2. Echelon and Origins (legacy): the compressor ran for the full period between two defrost cycles. It is not shown on the display, only in the error log.

How to see it

Open the error log from the control. The log scrolls through faults in the order they happened. All of them are stored, yet the display itself only reports a door error, together with an audible signal.

At a glance

Code E4
What it means Thermistor 4 is open and does not apply on current models; on legacy models the compressor ran the full period between defrost cycles.
What you can check Open the error log from the control to see the entry. No owner action is described for this code.
When to call a technician If the code keeps appearing or the unit is not holding its temperature, arrange service.

Owner action

None is listed for E4. If the code keeps appearing or the unit is not holding its temperature, arrange service.

See also

E3 (thermistor 3 open), E5 (thermistor 1 shorted) and E10 (top drawer open for more than 20 minutes) are the usual codes people mix up with it.

Book U-Line refrigerator repair in your area

Our service-center line covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 706-1091. See refrigerator repair for the service details. Keep the model number and the code in front of you, and mention any steps already tried.

Source: U-Line UHRE515-IS01A User Guide & Service Manual; U-Line UHRE524-SS81A User Guide & Service Manual, View Error Log; U-Line 2008 Service Manual, Echelon and Origins Series, Error Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit