Skip to content
Response time varies by location and service availability.
Error Code

U-Line Refrigerator E3 Code: Thermistor 3 Open

Error code E3
Appliance Refrigerator
Quick answer

E3 is thermistor 3 open on current U-Line units, but a door-open alarm on legacy Echelon and Origins models.

Model compatibility: U-Line reuses display codes across control platforms, so E3 may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

E3 is thermistor 3 open on current U-Line models and a door or bottom drawer left open over 20 minutes on legacy models.

Quick answer by series

  • UHRE515/524, UHWC524, UHBD524, UHRI124, UHRF124: thermistor 3 open.
  • Echelon and Origins (older series): main door or bottom drawer open for more than 20 minutes, with a beep each minute. Not available on the CLR2160.

What to do

  1. Work out which series you have from the model number on the unit.
  2. On an older unit, shut the door or drawer to clear the alarm. If the light and display remain on, look at where the magnet sits.
  3. On a current unit, open the error log. The manual says faults are written to memory in order, while only a door fault appears on screen and sounds a signal.

Thermistor 3 open is not something the manual gives the owner a fix for, so a repeat of it is a matter for service.

At a glance

Code E3
What it means Thermistor 3 is open on current models, or a door or bottom drawer was left open over 20 minutes on legacy models.
What you can check Work out your series from the model number. On an older unit, shut the door or drawer; if the light and display stay on, look at where the magnet sits. On a current unit, open the error log.
When to call a technician A repeat of thermistor 3 open has no owner fix, so book a service visit and give the code and model number.

Neighbouring codes

Compare with E7 (thermistor 3 shorted), E2 (thermistor 2 open) and E10 (top drawer left open) if the display does not match what you expected.

Book U-Line refrigerator repair in your area

Our service-center line covers the Miami, New York, Houston, Los Angeles and San Diego metro areas: (844) 706-1091. See refrigerator repair for the service details. Tell the dispatcher the code shown, the model number from the unit and what you have already done.

Source: U-Line UHRE515-IS01A User Guide & Service Manual; U-Line UHRE524-SS81A User Guide & Service Manual, View Error Log; U-Line 2008 Service Manual, Echelon and Origins Series, Error Codes

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit