U-Line OCP115 Outdoor Clear Ice Machine
15" outdoor clear ice machine (pump) — model notes, common issues and related U-Line clear ice maker service.
Model overview
Outdoor clear ice machines that use a pump put a steady load on their water circuit every day, and the U-Line OCP115 is a 15-inch current model built on that approach. Frequent ice runs, warm weather, and long stretches of use can all change the cubes, so note whether they come out small, cloudy or hollow. Production that slows or a bin that starts melting into one mass are the next things to watch. Water pooling at the base can also appear after heavy use. In the booking form, enter OCP115, describe the cube problem and roughly how many hours the machine runs on a typical day, and mention any code shown.
At a glance
| Model | OCP115 |
|---|---|
| Appliance | 15-inch outdoor pump clear ice machine |
| Common symptoms | small, cloudy or hollow cubes, slowed production, bin melting into one mass, water pooling at the base |
| What you can check | Note whether cubes come out small, cloudy or hollow and roughly how many hours the machine runs on a typical day. Record the model number and any code shown. |
| When to call a technician | Request a technician if cubes stay poor, production slows, the bin melts into one mass or water pools at the base after heavy use. |
OCP115 is a U-Line 15″ outdoor clear ice machine (pump). The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Width: 14 15/16 inches (379 mm). Depth: 22 1/4 inches (562 mm). |
|---|---|
| Capacity | Ice storage: 25 lb. |
| Power | Listed B-suffix variants use 115 V, 60 Hz. |
| Features | Maximum daily ice production: 55 lb. Silent setting stops ice making for three hours. |
| Controls | Digital touch controls include a blue LED display. |
| Care | An indicator signals when cleaning is needed. |
What sets the OCP115 apart
The OCP115 keeps a drain pump, so melt water is moved out by the pump instead of leaving by gravity, which gives more room for a level setup. Clear cubes measure about 7/8 inch on each side, and the 25 lb bin with 55 lb daily output is the same capacity as the pump-free OCL115.
Service notes for the OCP115
The drain pump on the OCP115 is checked before the freeze side when water appears at the base or the bin will not empty. A pump that runs but does not clear the base points to a blocked outlet or a kinked line, while a pump that stays silent is an electrical question. Small, hollow or cloudy cubes are traced to the water supply and the cleaning schedule, which the digital display flags with its cleaning indicator. The owner can power down, check the outlet, and note whether the display shows the indicator before the visit.
Questions about the OCP115
Where do I find the OCP115 model number?
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Do you repair the U-Line OCP115 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note whether the water supply was recently changed and how long production has been slow.
Common issues for this model
- Small, hollow or cloudy cubes
- Water leaking at the base
- Bin melting or refreezing into a block
- No ice or very slow production
Recommended repair service
U-Line Clear Ice Maker Repair
Clear ice maker producing cloudy cubes or no ice at all? We diagnose U-Line clear ice systems.
Troubleshooting resources
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.