U-Line 1 Class Collection HCP115 Clear Ice Machine
15" clear ice machine (pump) from the 1 Class Collection line — model notes, common issues and related U-Line clear ice maker service.
Model overview
The 1 Class Collection covers clear ice machines that use a pump to move water to the freezing surface, and that pump is one of the first things a technician looks at when production drops. The U-Line HCP115 is a 15-inch current model, so its model number on the label tells the crew which pump arrangement to expect. Slow or stopped ice output, cubes that come out small or hollow, or water pooling at the base each point toward different checks. Across the metro areas we cover, the model is confirmed before the cabinet is opened. In the booking form, enter HCP115, note whether the pump sounds active, and mention any code on the display.
At a glance
| Model | HCP115 |
|---|---|
| Appliance | 15-inch clear ice machine with pump |
| Common symptoms | slow or stopped ice output, small or hollow cubes, water pooling at the base |
| What you can check | Read the model number on the label, since it tells the crew which pump arrangement to expect. Note whether the pump sounds active and any code on the display. |
| When to call a technician | Slow or stopped ice output, small or hollow cubes or water pooling at the base call for a technician. Mention what the pump sounds like. |
HCP115 is a U-Line 15″ clear ice machine (pump) from the 1 Class Collection line. The model number is printed on the rating label, usually on a side wall or the ceiling inside the fresh-food section, or behind the base grille; match it letter for letter before booking, because a single letter can change parts.
Specifications
| Dimensions | Width: 14 15/16 inches (379 mm). Height: 34 1/8–35 1/8 inches (867–892 mm). Depth: 22 1/2 inches (572 mm). |
|---|---|
| Capacity | Ice storage: 25 lb. |
| Power | Listed variants use 115 V, 60 Hz. |
| Installation | Supports built-in or freestanding installation. |
| Features | Maximum daily production: 55 lb of ice. |
| Controls | Controls use a digital touch pad. |
What sets the HCP115 apart
The HCP115 includes a drain pump on its variants, so its melt water is moved by the pump rather than by gravity. Its height runs from 34 1/8 to 35 1/8 inches, so the owner should measure the opening against that range before installing. It makes up to 55 lb of ice a day and stores 25 lb, and its digital touch pad sets the controls for the unit in one place.
Service notes for the HCP115
On the HCP115, a technician checks the pump before the freeze side when water collects at the base. The drain pump is part of the variants, so a slow or stopped pump can back water up into the bin and lead to a block of ice that refreezes. Ask the owner to confirm the unit is level and that the drain outlet is clear, then describe whether ice production has dropped over several days or stopped at once. Small or cloudy cubes are a different complaint and can be described on the same visit.
Questions about the HCP115
Where do I find the HCP115 model number?
Check the rating label on a side wall or the ceiling inside the fresh-food section, or behind the base grille. Use the full number, including any letters at the end.
Do you repair the U-Line HCP115 on site?
Yes. We book in-home visits for this model in the Miami, New York, Houston, Los Angeles and San Diego metro areas. Add the model number and the symptom to the booking form.
What should I note before the visit?
Note whether the water supply was recently changed and how long production has been slow.
Common issues for this model
- No ice or very slow production
- Bin melting or refreezing into a block
- Water leaking at the base
- Small, hollow or cloudy cubes
Recommended repair service
U-Line Clear Ice Maker Repair
Clear ice maker producing cloudy cubes or no ice at all? We diagnose U-Line clear ice systems.
Troubleshooting resources
Note whether the water supply was recently changed and how long production has been slow.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.