HWD524
5 Class 24" dual-zone wine refrigerator reference.
Model overview
HWD524 dual-zone wine refrigerators are common in modern kitchens and bars. Zone-specific temperature complaints need clear setpoint history.
At a glance
| Model | HWD524 |
|---|---|
| Appliance | Dual-zone wine refrigerator |
| Common symptoms | Zone-specific temperature complaints in a dual-zone wine refrigerator used in kitchens and bars. |
| What you can check | Keep a clear history of the setpoints for each zone, and note which zone is off from what it should hold. |
| When to call a technician | Zone-specific temperature complaints are a job for a technician; share the setpoint history so the visit starts with what each zone was set to. |
Specifications
| Capacity | Storage volume is 5.1 cu. ft. Wine capacity is 42 bottles of 750 ml. |
|---|---|
| Power | Listed door variants use 115 V, 60 Hz power. |
| Installation | Supports built-in or freestanding installation. |
| Features | Upper compartment temperature range is 38°F–65°F. Lower compartment temperature range is 38°F–65°F. Six wine racks are removable and extend fully. |
| Controls | Digital touch controls include a blue LED display. |
What sets the HWD524 apart
The HWD524 separates itself with two temperature bands. The upper and lower compartments each run from 38°F to 65°F, so a red wine and a white can sit at different settings in one cabinet. The rule is that the upper setting sits at or above the lower one, and the gap can be no more than 20°F. Six removable racks extend fully, so the owner pulls a rack to reach the back bottles rather than lifting each one out.
Service notes for the HWD524
A technician looking at zone trouble on the HWD524 checks the setting pattern before the hardware. If the upper and lower zones are set against the rule, the controls can look faulty when the setting is simply out of range, so the owner should read the two set points off the display first. Zones that will not hold temperature come next, and the owner can note which compartment drifts and whether the door closes straight. Condensation on the back wall usually traces to room humidity or a door left open, which the owner can check at home. For noise, note whether it comes from the compressor cycle or from a fan, because the two lead to different checks.
Common issues for this model
- One zone not holding
- Cross-zone temperature swing
- Fan noise
- Door not sealing
Troubleshooting resources
Repair reference only. Share the full model and serial from the rating plate when booking.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Request your repair
Fill in the form below and we’ll confirm an appointment.