R Temp Hi 12H+ on a U-Line Ice Maker: Right-zone temperature more than 10°F above set point for over 12 hours. This page covers typical presentation, safe checks, and when to book U-Line Appliance Repair — confirm against your model docs.
Reviewed by Ethan Cole · Last reviewed August 11, 2026
Written by
Ethan Cole Appliance Repair Content SpecialistPublished August 11, 2026Technically reviewed August 11, 2026
Error codeR Temp Hi 12H+
ApplianceIce Maker
Affected model seriesU-Line Ice Maker with electronic diagnostic displays (confirm your model)
Quick answer
R Temp Hi 12H+ on U-Line Ice Maker appliances: Right-zone temperature more than 10°F above set point for over 12 hours..
Model compatibility: U-Line reuses display codes across control platforms, so R Temp Hi 12H+ may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
U-Line ice production controls may show R Temp Hi 12H+ for: Right-zone temperature more than 10°F above set point for over 12 hours.. U-Line Appliance Repair uses the code as a starting clue; final diagnosis still follows your appliance’s documentation.
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Record the exact display string shown (including flash patterns)
Write down when R Temp Hi 12H+ appeared and what the unit was doing
Confirm doors/drawers are fully closed and seals are clear of debris
Perform a manufacturer-approved power restart once if safe to do so
Important safety warning. Do not open internal panels, access high-voltage wiring, or attempt sealed refrigeration work. Never bypass safety devices. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
Please avoid
What not to attempt
Do not open internal panels or access high-voltage components
Do not open or attempt to recharge the sealed refrigerant system
Do not bypass door switches, safety devices or interlocks
Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
Get help
When to call a technician
Call U-Line Appliance Repair if R Temp Hi 12H+ comes back, the appliance will not run safely, or you smell burning / see standing water near electrics.
Code still showing?
Get this U-Line fault diagnosed properly
A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.
