Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller TRIAC BROKEN Code: Evaporator Fan Output

Error code TRIAC BROKEN
Appliance Blast Chiller
Quick answer

TRIAC BROKEN points to a board-detected failure on the evaporator fan's variable-speed PWM output. The manual says call service.

Model compatibility: U-Line reuses display codes across control platforms, so TRIAC BROKEN may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

A failure was found on the PWM output for the variable-speed evaporator fan; call service.

Meaning in brief

  • Alarm text: TRIAC BROKEN
  • Found by: the electronic board
  • Affected output: PWM for the variable-speed evaporator fan
  • Instruction: call service

Applies to

UCBF659, UCBF559, UCBF632, UCBF532 and UCBF432 (touch screen controller, current generation).

At a glance

Code TRIAC BROKEN
What it means A failure was found on the PWM output for the variable-speed evaporator fan; call service.
What you can check Look in the ALARM tab so you can quote the alarm exactly. No owner repair applies to this one.
When to call a technician The fault involves the output that runs the variable-speed evaporator fan, so a technician must look at it. Request a service visit.

Owner notes

Look in the ALARM tab so you can quote the alarm exactly. No owner repair is listed.

Similar board alarms

If you also see a relay message, compare RELAY 1 BROKEN through RELAY 8 BROKEN.

Blast chiller repair across the Miami, New York, Houston, Los Angeles and San Diego metro areas

Call (844) 706-1091 from the Miami, New York, Houston, Los Angeles and San Diego metro areas and describe the alarm and model. See refrigerator repair for the service type.

Source: U-Line UCBF559-SS12A Blast Chiller User Guide and Service Manual, Pub. 30379 Rev. P; U-Line Blast Chiller User Guide, Touch Screen Manual (Rev 08/04/2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit