Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller HIGH PRESSURE Code: Head Pressure Too High

Error code HIGH PRESSURE
Appliance Blast Chiller
Quick answer

Touch screen U-Line blast chillers show HIGH PRESSURE when head pressure goes above 29 barg (425 psig).

Model compatibility: U-Line reuses display codes across control platforms, so HIGH PRESSURE may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Head pressure too high, exceeding 29 barg (425 psig).

HIGH PRESSURE is shown when head pressure climbs past 29 barg (425 psig). The trigger is the pressure switch: when it opens, the touch screen version displays this message.

At a glance

Code HIGH PRESSURE
What it means Head pressure too high, exceeding 29 barg (425 psig).
What you can check Look for a clogged condenser. Also check whether the condenser fan motor has stopped. The pressure switch resets by itself once pressures return to range.
When to call a technician A pump down valve that fails to open, or any gas and refrigeration work, belongs to a technician. Call for service if the alarm returns or the fan and condenser look fine.

Where the manual points

  1. Look for a clogged condenser.
  2. Look for a condenser fan motor that has stopped.
  3. Look for a pump down valve that does not open while the compressor is running.

Good to know

  • Current models have only a high pressure switch, and it resets by itself once pressures are back in range.
  • Chillers in a remote pump down setup show no alarm message of this kind.
  • Gas and refrigeration work should be left to a technician.

Units

UCBF559 and UCBF659 with the touch screen, and the UCBF432, UCBF532 and UCBF632.

Compare with

HIGH TEMPERATURE and LOW TEMPERATURE cover air temperature, not pressure.

Blast chiller repair in the Miami, New York, Houston, Los Angeles and San Diego metro areas

For repeated HIGH PRESSURE alarms in the Miami, New York, Houston, Los Angeles and San Diego metro areas, phone (844) 706-1091. Please have the model and the checks you made. Our refrigerator repair page has more.

Source: U-Line Blast Chiller User Guide & Service Manual, Pub. 30379 Rev. P 11/2022 (Alarm/Failure List)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit