Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller CONDENSER HIGH TEMPERATURE Code: Not Enabled

Error code CONDENSER HIGH TEMPERATURE
Appliance Blast Chiller
Quick answer

On touch screen U-Line blast chillers the CONDENSER HIGH TEMPERATURE alarm is not enabled because no condenser probe is installed.

Model compatibility: U-Line reuses display codes across control platforms, so CONDENSER HIGH TEMPERATURE may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Condenser temperature too high versus normal; alarm not enabled in this version because the condenser probe is not installed.

The manual describes CONDENSER HIGH TEMPERATURE as a condenser running hotter than normal, judged against a temperature threshold. For this blast chiller version the alarm is switched off.

At a glance

Code CONDENSER HIGH TEMPERATURE
What it means Condenser temperature too high versus normal; alarm not enabled in this version because the condenser probe is not installed.
What you can check There is nothing to check at home. This alarm is switched off on this version of the chiller, so it should not normally appear.
When to call a technician If it does show up on your unit, have a technician look at it, since it relies on a condenser probe that is not fitted here.

Why it is not enabled

  • The alarm depends on a condenser probe.
  • The condenser probe is not installed in this version.

Units

UCBF559 and UCBF659 units, together with the UCBF432, UCBF532 and UCBF632, are covered by the touch screen alarm list.

See also

Read the entry for CONDENSER PROBE (S3) and the one for AIR PROBE (S1) when comparing probe-related alarms.

Service for blast chillers in the Miami, New York, Houston, Los Angeles and San Diego metro areas

We take blast chiller calls in the Miami, New York, Houston, Los Angeles and San Diego metro areas on (844) 706-1091. Keep the model number and the alarm wording ready. Our refrigerator repair page lists the equipment we work on.

Source: U-Line Blast Chiller User Guide & Service Manual, Pub. 30379 Rev. P 11/2022 (Alarm/Failure List); U-Line Blast Chiller User Guide – Touch Screen Manual (alarm list), Rev 08/04/2015

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit