Skip to content
Response time varies by location and service availability.
Error Code

U-Line Blast Chiller RELAY 2 BROKEN Code: Board Relay Failure

Error code RELAY 2 BROKEN
Appliance Blast Chiller
Quick answer

RELAY 2 BROKEN is a board alarm on touch screen U-Line blast chillers. Relay 2 has a detected failure and the manual says call service.

Model compatibility: U-Line reuses display codes across control platforms, so RELAY 2 BROKEN may mean something different on another appliance family or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

The board found a failure on relay 2; call service.

Relay 2 on the electronic board of a U-Line blast chiller has been flagged as failed, and the screen shows it as RELAY 2 BROKEN. U-Line’s alarm list gives the same response as for every board alarm: call service.

At a glance

Code RELAY 2 BROKEN
What it means The board found a failure on relay 2; call service.
What you can check Read the message in the ALARM tab and confirm it says relay 2. There is nothing further you can do at home.
When to call a technician The board has flagged a failed relay, so book a service visit. If another relay alarm also appears, report both.

Compatible models

  • UCBF432
  • UCBF532
  • UCBF632
  • UCBF559
  • UCBF659

They share the touch screen controller.

Reading the alarm log

The ALARM tab shows alarms raised while a cycle was running. If RELAY 4 BROKEN is also listed, report both to the technician.

Repair for blast chillers in the Miami, New York, Houston, Los Angeles and San Diego areas

Technicians cover the Miami, New York, Houston, Los Angeles and San Diego metro areas; ring (844) 706-1091. Have the model number and alarm text ready, and see refrigerator repair.

Source: U-Line UCBF559-SS12A Blast Chiller User Guide and Service Manual, Pub. 30379 Rev. P; U-Line Blast Chiller User Guide, Touch Screen Manual (Rev 08/04/2015)

Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Code still showing?

Get this U-Line fault diagnosed properly

A returning error code usually needs model-specific testing. Book a visit for a clear estimate — no surprise add-ons.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Response time varies by location and service availability.

Request your repair

Fill in the form below and we’ll confirm an appointment.

Call Book a visit